Question:

My windshield wiper motor will not stop even when the fuse for it was removed. I also tried replacing the windshield motor but the problem persisted. When scanned, no codes were found. Suggestions?

ATS Advisor:

Since you have already replaced for the wiper motor and the problem was not solved, have you checked the ground wires to this motor? If you are in doubt, you can run your own direct from the battery negative terminal. If this will not still fix it, replace the multi-function switch located in your steering wheel.

ATS tips:

If you contact ATS, you can get the complete wiring diagram for the wiper motor.

This entry was posted on Monday, January 22nd, 2007 at 9:51 pm and is filed under Check Engine Light FIXES. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.